SubMersive HP+ & HP-Slave Subwoofer
Additional $200 savings through December 22nd on select finishes.
The SubMersive was the first product offered by Seaton Sound in 2006. The first owners were all avid enthusiasts who learned about what Mark Seaton was doing with the SubMersive through the fast growing AVS Forum (link to AVS for a bit of nostalgia). Since then the SubMersive has seen 4 upgrades over the years keeping it a top contender against the best subwoofers available. Even more than a decade later the first pair of SubMersives in the linked AVS thread have been upgraded to our latest version of the SubMersive HP+ available here. The SubMersive successfully demonstrated that it was both possible and desirable to offer low frequency extension to below 10Hz in room and dramatically higher dynamic capabilities. You didn’t have to give up a concert kick drum if you wanted the room to shudder when depth charged on the screen. The SubMersive has evolved into 2 variations and a highly refined subwoofer equally at home in the most impressive home theaters and complimenting exotic music systems.
Flat rate shipping of $135 each within the lower 48 states.
International customers please e-mail us with your shipping address and the number of units you are ordering for an accurate quote. Shipping larger subwoofers internationally is largely determined by overall dimensions, so shipping two is often double the cost to ship a single unit.
In Stock orders have all parts on hand and will be assembled and shipped out within 5 days of ordering.
F18+ & F18-Slave Subwoofer
The F18 is a highly flexible, modular subwoofer solution where each F18+ unit with its 4,000W amplifier can power itself, as well as 1, 2, or 3 additional F18-Slave units. In-room extension to below 10Hz is possible in the largest to the smallest of spaces. Slave units can be placed separately from the F18+ unit such as an F18+ in the left front corner, and a connected F18-Slave unit in the front right corner.
Flat rate shipping of $135 each within the lower 48 states.
International customers please e-mail us with your shipping address and the number of units you are ordering for an accurate quote. Shipping larger subwoofers internationally is largely determined by overall dimensions, so shipping two is often double the cost to ship a single unit.
In Stock orders have parts on hand and will be assembled and shipped out within 1 week of ordering.
JS-12 Subwoofer
Flat rate shipping of $85 each within the lower 48 states.
International customers please e-mail us with your shipping address and the number of units you are ordering so we can get back to you with an accurate quote. Please note shipping a single unit internationally is often almost the same cost as shipping a pair.
In Stock orders have all parts on hand and will be assembled and shipped out within 2 weeks of ordering.
SubMersive F2+ & F2-Slave Subwoofer
The SubMersive F2+ is a high power subwoofer solution utilizing a pair of 15″ sealed woofers on the front face of the enclosure. Each F2+ unit with its 4,000W amplifier can power not only its own pair of sealed 15″ woofers, but also and additional SubMersive F2-Slave unit. In-room extension to below 10Hz is possible in the largest to the smallest of spaces. Slave units can be placed separately from the F2+ unit such as one F2+ in the left front corner, and a connected F2-Slave unit in the front right corner, or units can be stacked for greater headroom from the same footprint.
Flat rate shipping of $135 each within the lower 48 states.
International customers please e-mail us with your shipping address and the number of units you are ordering for an accurate quote.
In Stock finishes are available to ship within 1 week of ordering.
Catalyst 12C Powered Loudspeaker
It is often said, “necessity is the mother of invention.” The Catalyst was concieved after setting up multiple home theaters with 2 or 4 of our SubMersive subwoofers only to find the main screen channels (left, center and right) to be limiting the sonic experience. In moderate to large dedicated home theaters speakers designed for a living room quickly become strained with the dynamic peaks, especially with modern soundtracks and concert BluRays. Enthusiasts and designers have experimented with speakers from the studio and commercial audio world with varying success in their search to fill a big room with even bigger sound. The Catalyst was designed with the expectations of filling the largest rooms with ease while maintaining the refinement required for a quality home audio speaker. Through the use of a high efficiency, coaxial midrange-tweeter complimented by 2 custom, high excursion bass drivers, it is more likely your own limits get tested rather than those of the Catalyst 12C.
The Catalyst’s 8” coaxial midrange/tweeter delivers its high frequencies through the center of 8” midrange driver. This allows the entire range above 250Hz to emanate from a single location insuring listeners across the room and in multiple rows hear coherent and clear sound. The 2000W of internal ICEpower amplification separately powers the tweeter, midrange and pair of sealed woofers insuring its full capabilities are realized in every system. The 3 elements are blended smoothly and seamlessly with a DSP crossover implementation allowing precise adjustment and alignment of the sound. The end result is a refined, effortless and exciting experience.
Catalyst 8C Powered Loudspeaker
It is often said, “necessity is the mother of invention.” The Catalyst was concieved after setting up multiple home theaters with 2 or 4 of our SubMersive subwoofers only to find the main screen channels (left, center and right) to be limiting the sonic experience. In moderate to large dedicated home theaters speakers designed for a living room quickly become strained with the dynamic peaks, especially with modern soundtracks and concert BluRays. Enthusiasts and designers have experimented with speakers from the studio and commercial audio world with varying success in their search to fill a big room with even bigger sound. The Catalyst was designed with the expectations of filling the largest rooms with ease while maintaining the refinement required for a quality home audio speaker. Through the use of a high efficiency, coaxial midrange-tweeter complimented by 2 custom, high excursion bass drivers, it is more likely your own limits get tested rather than those of the Catalyst 12C.
The Catalyst’s 8” coaxial midrange/tweeter delivers its high frequencies through the center of 8” midrange driver. This allows the entire range above 250Hz to emanate from a single location insuring listeners across the room and in multiple rows hear coherent and clear sound. The 2000W of internal ICEpower amplification separately powers the tweeter, midrange and pair of sealed woofers insuring its full capabilities are realized in every system. The 3 elements are blended smoothly and seamlessly with a DSP crossover implementation allowing precise adjustment and alignment of the sound. The end result is a refined, effortless and exciting experience.
X21P/X21A 21″ Ported Subwoofer (Passive or Amplified)
The X21 is a large subwoofer using a massive, 21″ woofer and a pair of 6″ diameter flared ports allowing for high efficiency and clean output to fill the largest of rooms or bass appetites. We offer two options for the 21″ driver where our X21AD & X21PD models utilize a 4.5″ voice coil design, and our X21AI & X21Pi models utilize a massive 6″ split voice coil design for even more power handling, greater headroom, and even lower distortion. With the durability and efficiency of this system we are happy to allow users to select their own amplification in offering a passive version of the X21 subwoofer with either driver option while we provide recommended DSP filter settings for optimal performance. We also offer a 1200W ICEpower based amplifier with the X21AD variant and our 4000W amplifier with the X21AI which uses the larger 6″ voice coil woofer. You can find rather extensive measurements of what we call the X21PD here at Data-Bass.
Flat rate LTL freight shipping within the lower 48 states is $395 for a single, or $650 for a pair. For those closer than the west coast, please e-mail us with your shipping address for a custom quote and discount codes we can generate for shipping, or we can credit back any available savings after processing your order. This product is built to order with an expected 3 week lead time.
International customers please e-mail us with your shipping address and the number of units you are ordering so we can get back to you with an accurate quote.
MFW-15 Mk2 & Turbo X Amplifier
November 22nd, 2024 Update – 5 more MFW-15 Mk2/TurboX amplifiers are available to order here before we need to do another run of custom metalwork. After these 5 amplifiers I expect to have more available some time in February-March 2025.
Drop-In replacement amplifier for AV123’s MFW-15 subwooofer, originally designed by Mark Seaton for AV123 using custom optimized DSP and a conservatively rated, 700W ICEpower amplifier module. The amplifier is assembled in the US and similar to what we use in our JS-12 subwoofer. The same physical amplifier is used for the original MFW-15 Turbo Woofer and the new MFW-15 Turbo X woofer option, and can be shipped back for reprogramming for use with the Turbo or Turbo X woofer at any time in the future. Save the small 18 x 10 x 4″ box & packing for the amplifier if you might upgrade in the future.
Turbo X woofers are now available to order directly from Parts Express, currently $199 each with free shipping, you can also keep an eye out for sales in the coming months. The new MFW-15X woofer upgrade uses the Dayton MX15-22 woofer and offers a dramatic jump in performance over the stock woofer with limits that are well matched to those of the Mk2 amplifier, while offering a significant savings over what the previous Turbo woofer cost in years past, and is available at a fraction of what the same woofer costs at current prices. The MX15 woofer comes with a durable, high excursion, rubber surround, a triple stack magnet, and bumped and vented back plate. This woofer allows us to put the full power of the 700W ICEPower amplifier to use, where it’s capable of delivering more than 900W into a real speaker load. The tall rubber surround fits perfectly in the original MFW face plate, where the original Turbo required spacers affecting the aesthetic. With roughly double the linear excursion, it offers a significant upgrade over the original MFW-15 woofer.
Sign up for notification of amplifiers stock updates here.
Sign up here for e-mail notification of Turbo woofer availability.
Shipping within the lower 48 states is a $25 flat rate.
MFW-15 Mk2 to MFW-15 TurboX Amp Upgrade
We have recently finished testing and optimizing the MFW-15Mk2 amplifier for the drop in TurboX woofer upgrade using the Dayton Audio MX15-22 15″ Max-X High Excursion Subwoofer which can be ordered directly from Parts Express. While many wait for the next run of MFW-15 Mk2 amplifiers which will be shipping in February, those who already own an MFW-15 Mk2 amplifier can order the upgrade programming service here to get their amplifiers updated for the DSP optimization letting the amplifier deliver optimal frequency response and maximum power into the MX15-22 woofer.
1/17/2024 – Ordering is now open. Please click the different selection boxes to read the description of each option to select what you need so far as packing and shipping. Your order number is your return authorization. It should be marked on the outside of the package in marker, and inside with the amplifier. Please do not include power cords, and do not ship in amplifiers without an order in the system.
Heavy Duty SpeakOn Slave Cable
SpeakOn Slave Cable for connecting our slave subwoofers to + units or our rack mounted subwoofer amplifiers.
Built to ordered length in house using premium right angle Neutrik SpeakOn connectors and heavy jacketed, 4 conductor, 11AWG wire.
Please e-mail us (sales@seatonsound.net) for lengths longer than 50′ or any other special needs.
Black 4 x 12AWG SpeakOn Slave Cable
SpeakOn Slave Cable for connecting our slave subwoofers to + units or our rack mounted subwoofer amplifiers.
Built to ordered length in house using premium right angle Neutrik SpeakOn connectors and Belden’s black, 4 conductor, 12AWG wire which is very flexible, compact in diameter, and rated for in-wall use as well. This wire is smaller diameter, more flexible, and less expensive than our heavy duty 4 x 11 AWG cable.
Please e-mail us (sales@seatonsound.net) for lengths longer than 50′ or any other special needs.
XLR Male – Female Cable – Canare Black & Gold
XLR signal cabling we recommend and use with our subwoofers & powered loudspeakers. These cables are assembled and terminated in the US using Canare Star-Quad cabling for very high noise immunity with premium black & gold Neutrik XLR connectors.